Do you know Decorative Paper Wood Grain Knowledge | Cherry Wood

1.Introduction

Cherry wood is mainly distributed in the United States, and is also distributed in Europe and Japan. It is called European cherry wood and Japanese cherry wood respectively.
These two types of cherry wood are different from American cherry wood in structure and color, and the density is slightly heavier than that. The heartwood of cherry wood ranges from dark red to light reddish brown, with straight texture, narrow brown medullary spots and tiny tree capsules in the fine lines, and fine structure. The air-dry density of cherry wood is about 0.62g/cm, which is a high-grade wood and suitable for the production of high-end furniture. In the production of wooden doors, in addition to being used for solid wood doors, it is mostly used for the surface decoration of wooden doors. Cherry wood is a high-grade wood material, and the decorative paper wood grain is straight wood grain.
Cherry wood naturally contains brown heartwood spots and tiny gum nests, with fine and clear texture, good polishing, and good coating effect, which is suitable for high-end household products. It has good mechanical processing performance, dries relatively quickly, shrinks a lot during drying, but has good dimensional stability after drying.

Do you really know Decorative Paper Wood Grain Knowledge ?

European cherry wood

Geographical distribution: Europe, including the United Kingdom, Northern Europe, West Asia and North Africa
General characteristics: The heartwood is light red to brown, with straight texture and very fine and uniform structure. The average density is 610kg/m3 and the specific gravity is 0.61. Mechanical properties: The bending performance of the wood is very good, with medium bending strength and impact strength, medium impact resistance, but low hardness. The mechanical strength is equivalent to that of oak.
Processing: The degree of wear on the tool is moderate, and the surface of the straight texture is very smooth after processing, but when processing wood with staggered texture, the cutting angle should be 20°, otherwise it is easy to blunt the blade. The wood has good nail holding force, gluing and coloring properties, and can obtain a good surface processing effect. Uses: Because it is easy to warp, it is generally used in occasions with small cross-sectional dimensions. It is used in furniture and cabinets, and is suitable for making car parts, shuttles, toys and musical instrument parts. Its sliced ​​veneer is a high-grade finishing material for furniture, doors and wall panels.

Japanese cherry wood

General characteristics: The wood is light red to brown, gradually turning into the color of mahogany. The texture is straight, fine and uniform, with an average density of 630kg/cubic meter and a specific gravity of 0.63.
Mechanical properties: The bending strength, impact strength and impact resistance are all medium, with good flexibility, and can be bent and formed well after steaming. Processability: The wear degree of the tool is moderate. When there are cross-grain or irregular textures, planing or forming milling is carried out. In order to reduce the wear of the tool, the cutting angle should be 20°. The nail holding force and screw holding force are both good, and the gluing, coloring and polishing properties are also very good, and a good processing surface can be obtained.
Uses: It can be used for high-end decorative joinery, cabinets, indoor wood products, musical instrument parts, toys, shuttles, and is also very suitable for the production of car parts and carvings. Selected logs can be used to make sliced ​​veneers for furniture veneers or panel veneers.

American Cherry Wood

Geographical distribution: A small amount or sporadic distribution in deciduous forests in the United States and Canada.
General characteristics: The heartwood is dark red to light reddish brown, with straight texture, narrow brown medullary spots and tiny tree capsules in the fine lines, and fine structure. The average density is 561kg/cubic meter, and the specific gravity is 0.50.
Mechanical properties: The wood has good bending properties, medium hardness, medium strength, and resistance to impact loads.
Processability: The wood is easy to process by hand or machine, with low wear on tools, good nail holding force, adhesive force, and polishing.
Uses: It can be used to make parquet floors, pipes, musical instruments, furniture and cabinets, high-grade joinery, and marine interior decoration; it is particularly suitable for making car parts or carvings. Selected logs can be used to make furniture veneer, cabinet veneer, wall panels and smooth doors, etc.
Main value
It can be used to make parquet floors, pipes, musical instruments, solid wood furniture and cabinets, high-grade joinery, and marine interior decoration; it is particularly suitable for making car parts or carvings. Selected logs can be used to make furniture veneer, cabinet veneer, wall panels and smooth doors, etc.
Application and effect: Warm red feeling, can decorate a noble feeling, suitable for matching elegant and noble wood, be careful not to use too much fire, otherwise it will cause color pollution.